- Page 1 of 2
- Next page
The Functionality Of Oil Sprays And Their Types
Oil Sprayers & Dispensers are the best tools to use for a quick application of any type of oil, from motor oil to hydraulic oils. Their high-standard and material makes them highly flexible to use and their ability to dispense quickly under pressure means that they should be perfect for any industry. They are not only highly effective but are highly visible and can be used on any type of surface. They are great for applications where the oil is applied in small batches or where one needs to have the oil applied in record time. Their easy and simple use makes them very popular in many industries.
An oil spray gun is a mechanical device that creates spray streams from an internal pump that is driven by an engine via air or gasoline. They are normally set up so that the air flow through the nozzle is controlled by the viscosity of the oil being sprayed. The pump in the device pumps the oil into a storage tank for later use. Most oil spray guns will contain a needle or piston that injects the oil into the appropriate holding reservoir as it is shot out by a pressurized stream from the nozzle.
When working with oils, it is necessary to understand their viscosity to determine the proper amount to spray. As the viscosity rises so does the temperature of the oil and therefore the pressure. If the pressure is too high then the oil will not be dispensed properly and the viscosity will also increase making the oil hard to drain.
To determine the viscosity of the oil you need to know what type of oil it is. The first type of oil that can be easily determined with an oil spray gun is motor oil. This type of oil is usually thick and shiny and has a high viscosity. If you are using this type of oil on your engine then you should avoid using thinner oils or any oils that are greasy. This could also clog the air filter and result in an oil leak.
Another type of oil spray is marine diesel oil. This type of oil is thinner than motor oil and has a lower viscosity. Like motor oil it is important not to use thinner oils or greasy types of them. If you are unsure if the oil you are spraying is the correct type, then do not spray it at all. It is better to pour a small amount onto a cotton ball and see if you get the right viscosity.
When working with oil on a surface, be careful not to overfill the reservoir. If the viscosity pressure rises because of too much pressure in the spray, then the surface oil will leak. You may have to add more to allow enough pressure to overcome the rise in pressure.
There are three different types of oil spray nozzles. The first is a cap-and-holder type of nozzle. These are used for small jobs that do not require much pouring. These are good for applications where you need to apply small amounts of oil. The next type of spray nozzle is a gravity-flow nozzle and is used for medium to high-pressure applications.
Last but not least is the boom type of spray nozzle. These are used for medium to high-pressure applications where you have to pump the oil. The last type of spray nozzle is the screw pump. These are used for viscosity control and to keep the oil from spilling. They are also used in the oil industry for keeping wastage from the oil.